Surface Prep Tooling

From stripping coatings to profiling bare concrete, surface prep tooling is what gets a floor ready before you grind, polish, or coat. We carry PCD and metal-bond prep tooling that removes epoxy, glue, mastic, thin-set, and built-up contaminants — and profiles the surface for a strong bond — for Prep/Master® and planetary grinders. Not sure what your floor needs? Call and we'll match the tool to your coating and your finish.

Shop Surface Prep Tooling

#0 Surface Prep Tool (3SEG Oval) — metal-bond; removes adhesives, thin-set, and epoxy and leaves a clean 80-grit profile
#00 Prep Tool — PCD/metal-bond combination, directional; heavier removal, rougher profile
#000 PCD Tooling — aggressive PCD tooling for the thickest coatings, glue, and mastic
EG Prep Tools for Removal — the full EG-attachment removal lineup
Bush Hammer Tooling — aggressive texturing for CSP 4–5 and anti-slip profiles

What Surface Prep Tooling Does

Removes coatings, paint, and epoxy
Strips carpet glue, mastic, and adhesives
Knocks down thin-set and built-up contaminants
Profiles bare concrete for coatings, overlays, or polishing

Inland Vacuum Brazed Wood Floor Cup Wheel

Sand and strip wood floors with your hand grinder — edges, corners, and small areas
De-gloss polyaspartic coatings on concrete — scuff the surface for recoating
Hand-grinder size for the spots a big floor tool can’t reach
Vacuum-brazed diamond construction for aggressive, durable cutting
Available in 5″ and 7″, in 16 grit

5 Segment Multi-Mount Tool

3-inch diameter, 5-segment multi-mount tool
Ideal for the Prep/Master® Jr and similar-size lighter machines
Best for: general surface prep, thin-mil coating or paint removal, and first steps for polishing
Grits available: 16, 30, 70, and 120
Metal bond available: Medium and Hard
Threaded 8mm holes

10 Segment Multi-Mount Tool

Inland 3-inch, 10-segment multi-mount puck
Best for: general surface prep, thin-mil coating or paint removal, and first steps for polishing
Grits available: 16, 30, 70, and 120
Metal bond available: Medium and Hard
Threaded 8mm holes

How to Choose

The right prep tool depends on what’s on the floor and the profile you need afterward — from a light, clean prep to aggressive PCD coating removal. Bond and aggressiveness matter, and so does whether you’ll grind or coat next. Not sure? Call us and we’ll match the tooling to your job.

Order Surface Prep Tooling Today

Call (815) 941-4800 x 1 or fill out our contact form. New to this? See our diamond systems and diamond tooling.