Substrate Technology
CONSTRUCTION EQUIPMENT & SUPPLIES
Phone:
+1 (815) 941-4800
Address:
1384 Bungalow Rd.
Morris, Illinois, U.S.A.

Concrete Repair & Patching

Concrete Repair & Patching

Concrete Repair & Patching Products

Fix it right the first time. When concrete cracks, spalls, or a joint breaks down, the repair has to bond, hold up under traffic, and last — a bad patch just fails again and spreads the damage. We carry professional-grade repair materials, patching compounds, joint sealants, and repair mortars from Smith's and SSP (Solid Solution Products), matched to the kind of damage you're fixing. Call and talk to a real surface-prep expert, not a call center.

Crack Fillers

Fill and repair cracks so they don't spread:

  • Smith's PCF-45 — fast-set polyurethane crack filler and patch for static cracks and pits; grind in under an hour
  • SSP Camo Patch UV — UV-resistant patching compound for repairs that hold their color

Patching Compounds

Patch spalls, gouges, and damaged concrete:

  • SSP Patch Crete Coarse — for larger, deeper concrete repairs
  • SSP Patch Crete Pure — for a clean, refined patch
  • Smith's Epoxy FRM — heavy-duty epoxy repair mortar for resurfacing and deep structural repairs

Joint Sealants & Fillers

Fill and protect control and expansion joints:

  • Smith's Poly JF — semi-rigid polyurethane joint filler that protects control-joint edges from traffic
  • SSP Joint Seal 600 UV — UV-resistant joint sealant for expansion and control joints

Decorative & Color Matching

  • SSP color-matching accessories — match repairs to decorative concrete for a seamless finish
Not sure which fits your repair? Call us and we'll match the product to the job.
Sort By:
Show:

Smith’s Poly PCF-45 — Concrete Crack Filler & Patch

  • Fills cracks, spalls, pop-outs, holes, and voids in concrete
  • Fast return to service — grind in 15–60 minutes; heavy traffic in ~1 hour
  • Low viscosity — penetrates hairline cracks; extend with sand for deep repairs
  • 1:1 mix ratio — easy to measure and mix; no primer needed
  • Tenacious bond to prepared concrete (650 psi — the concrete fails first)
  • Chemical- and impact-resistant with good load transfer
  • Feather edge to any depth (with aggregate extension)
  • Interior/exterior, above or below grade — even freezer/chiller floors and radiant-heat floors
  • Doubles as a pit grout for polished concrete

Smith’s Poly JF — Semi-Rigid Joint Filler

  • Semi-rigid polyurethane — supports and protects joint edges under heavy traffic
  • Self-leveling, pourable — easy to place and finish
  • 100% solids — zero VOC, low odor, non-tainting
  • Fast — shave in 90–120 minutes, diamond grind in ~6 hours, forklift traffic in 8–10 hours
  • Moisture tolerant — can be used with Smith’s moisture-mitigation primers on damp slabs
  • Bonds tenaciously to concrete, overlays, coatings, tile, and metal
  • For joints and repairs up to 5″ deep
  • FDA/USDA/CFIA facility acceptable — non-tainting
  • No red-label shipping required

Smith’s Epoxy FRM — Fast Repair Mortar

  • 3-component, 100% solids epoxy mortar — trowel applied
  • Heavy-duty — 10,500 psi compressive strength, 85–90 Shore D hardness
  • Fast return to service — heavy/forklift traffic in as little as 8 hours at 72°F
  • High impact and abrasion resistance — excellent rolling-load resistance for cart and forklift traffic
  • For repairs ≥ 3/16″ — resurfacing, deep patching, joint-wall rebuilding
  • Bonds tenaciously — concrete fails before the bond does
  • Low odor, low VOC
  • Mix in the container — convenient packaging

SSP Camo Patch UV — Polishable Patch & Grout

  • UV-proof and non-yellowing — won’t discolor in sunlight
  • Translucent — blends into the surrounding concrete
  • Extendable — add pigments and dry aggregate to mimic the existing floor
  • Self-priming — no separate primer step
  • Moisture tolerant
  • Non-brittle
  • Extended working time — more forgiving to apply
  • Fast — grind after 90 minutes, polish after 2 hours
  • VOC compliant and certified
  • Colorable with iron oxide powders or SSP liquid pigments (Camo Patch UV Color Packs)

SSP Camo Patch UV Color Packs

Available Colors

  • #0 Non-Pigment
  • #1 White
  • #2 Latte
  • #3 Tan
  • #4 Beige
  • #5 Saddle Brown
  • #6 Gray Matters
  • #7 Anonymous
  • #8 Gray
  • #9 Black

SSP Joint Seal 600 UV — Polyurea Joint Sealant

  • UV-proof and non-discoloring — maintains its color long term (ASTM G-154, minimum change)
  • 600–650% elongation — flexes with the joint without tearing or separating
  • Aliphatic polyurea — superior UV colorfastness, indoors or out
  • Moisture tolerant — cure isn’t affected by ambient moisture
  • Self-leveling, 100% solids, 0 g/L VOC
  • Extended working time — user-friendly hand mix
  • Semi-rigid, rubber-like cured finish; Shore 77A hardness
  • Fast — tack-free in 1 hour, shave after 2 hours
  • LEED v4.1 compliant; aligns with ACI 302 guidelines

SSP Joint Seal 600 UV Color Packs

Available Colors

  • Limestone
  • Gray
  • Dark Gray
  • Anonymous
  • Thunderous
  • Gauntlet
  • Chocolate
  • Saddle Brown
  • Walnut
  • Caramel
  • Burnt Sienna
  • Sand
  • White
  • Black

Why UV-Resistance Matters Outdoors

Many repair products yellow, chalk, or discolor in sunlight — leaving patches that stand out. For exterior and decorative work, SSP’s UV-resistant repair systems hold their appearance over time, so your repairs blend in and stay looking right.

Shipped Fresh, Factory-Direct

Our repair products ship factory-direct from the manufacturer to your job site — fresh product, straight from the source, when you need it. Tell us what you need and we’ll take care of the rest.

Order Concrete Repair Products Today

Call (815) 941-4800 x 1 or fill out our contact form. See our Smith Paints, SSP Solid Solution Products, and industrial coatings.