Substrate Technology
CONSTRUCTION EQUIPMENT & SUPPLIES
Phone:
+1 (815) 941-4800
Address:
1384 Bungalow Rd.
Morris, Illinois, U.S.A.

Surface Preparation Chemicals for Sale

Surface Preparation Chemicals for Sale

Get the chemicals that finish the job — the densifiers, sealers, hardeners, and coatings that turn a ground floor into a hard, polished, protected surface. We carry concrete surface prep chemicals from trusted brands, and we'll help you pick the right product for your floor and your finish. Call and talk to a real surface-prep expert, not a call center.

What You'll Find

  • Densifiers and hardeners — strengthen and densify concrete for a durable polish
  • Sealers — protect and enhance the finished surface
  • Coatings and finishes
  • Cleaners and prep chemicals

Backed by Brands You Trust

We carry chemicals from leading names like Hertron International (densifiers, sealers, and concrete chemicals) and Smith Paints (coatings and finishes) — proven products that pair with your prep and polishing work.

Sort By:
Show:

SSP Patch Crete Pure

  • Shrink-compensated hydraulic cement — repairs stay intact, even at feather edges
  • White base — pigmentable with Camo Patch liquid colors or iron oxide powder
  • Fast cure
  • Compatible with local aggregate — match the surrounding concrete
  • Grinds and polishes to a high-appearance finish
  • Strong — 6,200 psi compressive, 3,600 psi tensile, 6+ Mohs abrasion resistance

SSP Patch Crete Coarse

  • Dry cement/aggregate mix for polishable patch repair
  • Coarse aggregate — produces a salt-and-pepper finish
  • Proprietary fine non-shrink cements
  • Mixes with polymers to add volume and polishability
  • Water-activated cements for further polishing after grinding

Smith’s Polyaspartic 8000LO

  • 76% solids aliphatic polyaspartic — resilient, high-performance film
  • Very low odor and less than 248 g/L VOCs
  • Extended pot-life vs. traditional polyaspartics — easier workability
  • Up to 15 mils per coat without foaming — high build in a single lift
  • UV-stable / aliphatic — non-yellowing — for interior AND exterior use
  • Hot tire pickup resistant
  • Hot liquid spill tolerant to 300°F (over a thermal-shock-resistant system like Smith’s CPR)
  • Overnight return-to-service
  • Highly durable — chemical, stain, and abrasion resistant
  • Easy to clean and maintain
  • Meets FDA & USDA flooring requirements (indirect food contact); non-tainting for food-flavor-sensitive areas
  • 1-to-1 mix ratio — simple to use
  • Low VOC, no red label — solvent-based but compliant (meets California AQMD Rule 1113; not regulated as HAZMAT)

Smith’s Poly JF/FC — Semi-Rigid Joint Filler, Fast Cure

  • Heavy-duty — chemical resistant, flexible, tenacious bond
  • Fast cure — shave in 60 min, dry-grind in 2.5–3.5 hrs, forklift traffic in 14–18 hrs
  • Pourable, self-leveling 2-component filler for interior control or construction joints
  • 100% solids, low odor, low VOC
  • Protects joint edges from spalling under forklift, caster, and heavy traffic
  • Pour as deep as 5″ and 1.5″ wide in a single lift
  • Suppresses minor cracks from telegraphing
  • Resists aging and elasticity fatigue
  • Suitable over in-floor radiant heat systems
  • Can be topcoated with thin-film polyaspartics and polyurethanes (under 8 mils) once hard
  • Natural beige color; accepts Smith’s ISC Color Packs (excluding white/ivory white)
  • Moisture-tolerant; final service temps 40°F–200°F
  • FDA/USDA/CFIA-compliant — non-tainting, for regulated facilities
  • No red label required for shipping

Order Surface Prep Chemicals Today

Call (815) 941-4800 x 1 or fill out our contact form. See our diamond systems, diamond tooling, and brands.