Standard Trapezoid Prep Tool – Single Bar

This Inland single-bar trapezoid tool mounts to a wide range of bolt-on grinders for surface prep and coating and adhesive removal. A standard-attachment trapezoid built to fit SASE®, Diamatic, CPS, Klindex, and other bolt-on machines — with grit and bond options to match your job.

Call for pricing, availability, and the right grit and bond for your work — you’ll talk to a real surface-prep expert, not a call center.

Fits These Bolt-On Grinders

• SASE® — PDG 5000 / 5000P / 6000 / 8000 / 8000P / 9500 / R8; SHG 270
• Diamatic — BGS-435 / 555 / 735 / 780
• Klindex — Expander series
• CPS — G170 / 210 / 250 / 290 / 320D
• Innovatech / Bartell — Predator 1800 / 2400 / 32D / 32NDX
• …and other bolt-on grinders

Key Features

• Single bar trapezoid for standard attachment
• Best for surface prep and coating & adhesive removal
• Grits available: 16, 30, 60, and 120
• Metal bond available: Soft, Medium, and Hard
• Threaded 8mm holes

Single Bar or Double Bar — Which Do You Need?

We offer this trapezoid in two segment configurations:

• Single Bar (this tool) — one segment bar; a good general-purpose option
• Double Bar — two segment bars (Inland C6); more diamond contact for general surface prep and thin-mil removal

Not sure which fits your job? Call us and we’ll help you choose the right configuration, grit, and bond.

Choosing Grit & Bond

• Grit — 16 (most aggressive) through 120 (finer); coarser for heavy removal, finer for a smoother prep
• Bond — Soft, Medium, or Hard; softer bonds for harder concrete, harder bonds for softer concrete

Important Ordering Notes

• For SASE® machines, each tool requires 3 SASE Screws — order 3 screws per tool (a set of 9 tools needs 27 screws)
• Threaded 8mm holes can be drilled out to 9mm to fit magnetic plates with dowel pins — specify this at the time of ordering

Frequently Asked Questions

What’s it for? Surface prep and coating and adhesive removal.

What grinders does it fit? SASE, Diamatic, CPS, Klindex, Innovatech/Bartell, and other bolt-on grinders.

How is it different from the double bar? This is a single-bar segment; the double bar has two segment bars for more diamond contact.

Do I need screws? For SASE machines, yes — 3 SASE Screws per tool.

Order Your Single Bar Trapezoid Tool Today

Call (815) 941-4800 x 1 or fill out our contact form. See our double bar trapezoid, SASE Screws, and Inland Diamond tooling.