Standard Trapezoid Prep Tool — Double Bar

This Inland C6 double-bar trapezoid tool mounts to a wide range of bolt-on grinders for general surface prep and thin-mil coating and adhesive removal. A standard-attachment trapezoid built to fit SASE®, Diamatic, CPS, Klindex, and other bolt-on machines — with grit and bond options to match your job.

Call for pricing, availability, and the right grit and bond for your work — you’ll talk to a real surface-prep expert, not a call center.

Fits These Bolt-On Grinders

• SASE® — PDG 5000 / 5000P / 6000 / 8000 / 8000P / 9500 / R8; SHG 270
• Diamatic — BGS-435 / 555 / 735 / 780
• Klindex — Expander series
• CPS — G170 / 210 / 250 / 290 / 320D
• Innovatech / Bartell — Predator 1800 / 2400 / 32D / 32NDX
• …and other bolt-on grinders

Key Features

• Threaded 8mm holes
• Inland C6 double-bar trapezoid for standard attachment
• Single bar segment design
• Best for general surface prep and thin-mil coating & adhesive removal
• Grits available: 16, 30, 60, and 120
• Metal bond available: Soft, Medium, and Hard

Double Bar or Single Bar — Which Do You Need?

We offer this trapezoid in two segment configurations:

• Double Bar (this tool) — two segment bars (Inland C6); more diamond contact for general surface prep and thin-mil coating & adhesive removal
• Single Bar — one segment bar; a good general-purpose option

Choosing Grit & Bond

Match the tool to your job:

• Grit — 16 (most aggressive) through 120 (finer); coarser for heavy removal, finer for a smoother prep
• Bond — Soft, Medium, or Hard; softer bonds for harder concrete, harder bonds for softer concrete

Not sure which grit and bond you need? Call us and we’ll help you match them to your floor and your job.

Important Ordering Notes

• For SASE® machines, each tool requires 3 SASE Screws — order 3 screws per tool (a set of 9 tools needs 27 screws)
• Threaded 8mm holes can be drilled out to 9mm to fit magnetic plates with dowel pins — you must specify this at the time of ordering

Frequently Asked Questions

What’s it for? General surface prep and thin-mil coating and adhesive removal.

What grinders does it fit? SASE, Diamatic, CPS, Klindex, Innovatech/Bartell, and other bolt-on grinders.

What grits and bonds are available? Grits 16, 30, 60, and 120; Soft, Medium, and Hard bonds.

Do I need screws? For SASE machines, yes — 3 SASE Screws per tool.

Order Your Trapezoid Prep Tool Today

Call (815) 941-4800 x 1 or fill out our contact form. See our SASE Screws, Inland Diamond tooling, and diamond tooling.