Smith’s WB Marking Paint

Smith’s WB Marking Paint is a ready-to-use, fast-curing waterborne marking paint for line striping, floor markings, safety demarcation, and more. This high-solids, single-component paint goes down easy with a roller, brush, or sprayer and air dries for full traffic in just 1–2 hours — with good opacity, a slightly textured low-sheen finish, and excellent UV stability for interior or exterior use.

Call for pricing, colors, and availability, or request a quote — you’ll talk to a real surface-prep expert, not a call center.

Key Features

• Fast return to service — air dries for full traffic in 1–2 hours (even at 50°F / high humidity)
• Durable — accepts forklift and pallet-jack traffic within a few hours
• Ready to use, single component — no mixing, easy to apply
• Excellent UV stability — interior or exterior
• Holds crisp tape-line edges — good bleed-through resistance for clean lines
• Low odor, low VOC, non-flammable — use in all regions
• Good opacity with two coats; may be applied up to 30 mils WFT in a single layer
• Soap-and-water cleanup while wet
• Meets Federal Specification TT-P-1952F Type III

What It’s For

• Line striping — floors, parking lots, walking paths
• Safety demarcation — work zones, aisles, hazard areas
• Floor markings and demarcation lines
• Curbs and bollards
• Pest control inspection areas
• Airport tarmacs

What It Goes On

• Concrete
• Asphalt walking paths and parking lot lines
• CMU, cinder block, and brick/pavers
• Well-bonded, properly prepared coatings and industrial floor paints

Always test for compatibility over existing cured coatings, and apply within the recoat window (or sand dull and clean first over resinous/low-permeability coatings).

Why WB Marking Paint?

For striping and safety markings, you need paint that goes down fast, dries fast, and holds a crisp line — so you’re not shutting a facility down for long. WB Marking Paint delivers: quick return to service, forklift-ready durability, UV stability so lines don’t fade, and clean tape-line edges. Single-component and soap-and-water cleanup make it easy to use, and it works interior or exterior on a wide range of surfaces.

Frequently Asked Questions

What’s it for? Line striping, floor markings, safety demarcation, curbs, and more — interior or exterior.

How fast does it dry? Full traffic in 1–2 hours at 72°F; forklift/pallet-jack traffic within a few hours.

What surfaces? Concrete, asphalt, CMU/block, brick/pavers, and well-prepared coatings.

Is it durable? Yes — it takes forklift and pallet-jack traffic and is UV-stable for interior or exterior use.

Order Smith’s WB Marking Paint Today

Call (815) 941-4800 x 1 or fill out our contact form. See our industrial coatings, Smith Paints, and chemicals.

SAFTEY DATA SHEETS:

• SDS – Smith’s WB Marking Paint – Safety Red
• SDS – Smith’s WB Marking Paint – Black
• SDS – Smith’s WB Marking Paint – Safety Blue
• SDS – Smith’s WB Marking Paint – Dark Green
• SDS – Smith’s WB Marking Paint – Traffic Yellow
• SDS – Smith’s WB Marking Paint – White 5500