IMPACTS S210E Shot Blaster (8-inch)

How to Operate the IMPACTS S210E Shot Blaster

IMPACTS S210E Blast Wheel Change Procedure

IMPACTS S210E/S210E-40R Liner Change Procedure

Is your S210E losing too much shot while blasting?

Here are a few things to check:

1. Is the vac over 200CFM?
If so, a reduction of the blaster outlet may be needed, or reduce the airflow (if possible) by cutting a motor.

2. Is the shot blasting machine adjusted 8mm from the floor?
If not, adjust the chassis wheels up or down to make the gap 8mm (an 8mm pad from STI works well to gauge the 8mm gap).

3. Are you running 25-ft or 50-ft of 2-inch hose?
A 25-ft hose can create too much airflow and lift. Use a 50-ft hose instead to reduce the suction from the dust collector.

So, how do I know if I'm losing too much shot on my S210E?

Here is a good gauge of knowing how much shot you should have:
 • A 50 lb. bag of 290-390 shot should cover at least 1,500 SF (150 M²) before being used up and becoming dust itself.

Please let us know if you have any other questions regarding shot blasting and surface prep. We'd be happy to help!